Frequently Asked Questions (FAQ)
APR Programming
AP1: Can I change the default APR program from Medical to Vet on my APX console?
 |
AP1: Can I change the default APR program from Medical to Vet on my APX console? |
 |
Yes. First turn off the control console.
- Press and hold the second button from the left on the row of buttons below the display. While holding this button, turn the console on. Now, release all buttons
- Enter the password (default password is 0000) and press OK
- Select Flash Options
- Select Default APR Data
- The screen will ask, “Are you sure?” Select Yes. After a few seconds the console will beep and read OK
- Press Exit, then Exit again
- The APR should now read Vet
The procedure is the same to go from Vet to Medical
Up ^ |
